Documents & files

Downloads

Catalogs and laboratory test reports to support informed specification of hokon boards for your project.

Independent laboratory test reports

Results apply to the samples, thicknesses, methods and conditions identified in each report. Request the applicable documentation for your selected product and specification.

Read the evidence behind our responsibility commitments →

Test report

TÜV SÜD Test Report

Report No. TC.26.02.000814-R1 · Issued 2026-03-10 · 19 pages

Laboratory report for the 062A-18mm melamine-faced bamboo chipboard sample. Formaldehyde emissions were below the method detection limit of 0.01 mg/m³ under EN 717-1:2004. The 253 SVHC substances listed in the report were not detected at a method detection limit of 0.010%. Results apply to the tested sample and stated conditions.

Download PDF · 1.5 MB

Test report

Test Report — 6 mm Decorated Fiberboard

Report No. C25-WT2944E · Issued 2026-01-09 · 7 pages

Foshan Supervision Testing Center of Quality and Metrology report for a 6 mm surface-decorated fiberboard sample. Formaldehyde emissions were below 0.010 mg/m³ at 53 hours in a 1 m³ chamber test. The report records a pass against its stated 0.124 mg/m³ limit, with testing to GB/T 15102-2017 and GB 18580-2017.

Download PDF · 2.5 MB

Test report

Test Report — 9 mm Decorated Plywood

Report No. C25-WT2945E · Issued 2025-12-25 · 7 pages

Foshan Supervision Testing Center of Quality and Metrology report for a 9 mm surface-decorated plywood sample. Formaldehyde emissions measured 0.015 mg/m³ at 53 hours in a 1 m³ chamber test, below the report's stated 0.124 mg/m³ limit. Testing references GB/T 34722-2017 and GB 18580-2017.

Download PDF · 4.9 MB